Our technologies are suitable for power generation and industrial applications, including aluminum, iron and steel, oil and gas, cement, waste-to-energy, biomass, pulp and paper, and nonferrous metals, among others.
Certificate EN 1090
Certificate EN ISO 3834-2:2005
Certificate ISO 9001:2015
Certificate ISO 14001:2015
Certificate ISO 45001:2018
Certificate of Origin ST-1
Made in Russia
- Particulate matter
Electrostatic precipitators and fabric filters
Dry, wet and seawater desulfurization system
Retrofit: selective catalytic reduction
New plants: combustion modification
- Study and analysis of operating parameters of dust and gas cleaning systems
- Inspection of technical condition of devices of a dust-gas cleaning
and the auxiliary equipment of installation
- Development of technical proposals
on modernization and reconstruction of devices and installations
- The volume of works on modernization and reconstruction of
devices and dust and gas cleaning units was determined
- The efficiency and productivity of the process
- Configuration and design of new and existing installations
- Integration into production environment
- Construction and installation
- Training and introductory briefing on the organization and sequence of installation of gas cleaning equipment
- The acceptance of buildings for installation of equipment, inspection of welds
- Step-by-step acceptance of the main gas cleaning units
- Check "in the air": run-in mechanisms with the inclusion of smoke pumps, check the electrical mode, etc.
- Assembly and installation of main nodes
- Assembly of elements of technical system of protection of atmospheric air
- Test run
- Trouble shooting
- Long-term service agreements
- Supply of spare parts
12.05.2020FINGO certified by TÜV Rheinland for European welding standart EN ISO 3834
The Fingo-Complex company was certified by the TÜV Rheinland international bureau for compliance with the requirements of the European standard of the quality management system in welding production EN ISO 3834-2: 2005, thereby confirming the right to manufacture dust and gas cleaning equipment for customers from Europe, Asia, Africa and America.
23.04.2020The FINGO plant passed the TÜV Rheinland audit and received the certificate EN 1090
FINGO became the first and only manufacturer of gas-cleaning equipment in Russia, which received the TÜV Rheinland certificate of production control EN 1090, confirming the conformity of the manufactured metal products to the requirements of the European Union.
10.04.2020Videoconference with the Trade Representatives of the Russian Federation
On April 10, a videoconference was held with industrial companies of the Yaroslavl region and representatives of Russia in foreign countries. At the meeting, Director for Supply and Logistics Dmitry Zemlyakov presented the competitive advantages of FINGO gas treatment plants and international experience in the supply of equipment.
06.03.2020FINGO at the business breakfast of Business Russia with the participation of the Nigerian ambassador
The meeting discussed the development of Russian-Nigerian trade and economic cooperation. Representatives of FINGO made a presentation about the company and spoke about the best gas cleaning solutions for the industrial sector in Nigeria.
27.02.2020FINGO at the conference SEYMARTEC AIR. Industrial Emissions
Fingo-Complex took part in the international conference SEYMARTEC AIR. Industrial Emissions – 2020, where it presented to the potential customers modern gas cleaning solutions for the metallurgy industry.
10.01.2020FINGO received a certificate of origin ST-1
In January 2020, the Fingo-Complex company received a certificate of origin ST-1 from the Moscow Chamber of Commerce and Industry, which confirmed that our products are manufactured in Russia from domestic raw materials.
18.11.2019FINGO delegation presented electrostatic precipitators and bag filters at EXPO-RUSSIA VIETNAM 2019 in Hanoi
FINGO delegation presented electrostatic precipitators and bag filters at EXPO-RUSSIA VIETNAM 2019 in Hanoi.
15.11.2019FINGO participated in the international industrial exhibition Metal-Expo'2019
At the Metal-Expo'2019 industry exhibition, which was held from 12 to 15 November in Moscow at the Exhibition of Economic Achievements of Russia, at the FINGO booth, comprehensive solutions were presented for the engineering, inspection, Troubleshoot, modernization and service of industrial gas cleaning and aspiration air systems for the metallurgical industry.
13.11.2019FINGO became a member of the Finnish-Russian Chamber of Commerce
FINGO company became a member of the Finnish-Russian Chamber of Commerce (FRTP), a leading expert organization in the development of trade and economic relations between Finland and Russia. The cooperation is aimed at developing a dialogue with Finnish business, including in the field of innovations in the field of ecology and the purification of industrial emissions.
25.10.2019FINGO at the Smart Nordic 2019 business forum
Representatives of the FINGO company took part in the Smart Nordic 2019 business forum, where they held talks with international companies on cooperation in environmental engineering, both in Russia and in export markets.
21.10.2019FINGO at the exhibition Metal-Expo 2019
The FINGO company will take part in the 25th Metal-Expo international industrial exhibition, which will be held from 12 to 15 November in Moscow at VDNH.
26.09.2019FINGO at the international exhibition DUST AND GAS CLEANING-2019
24 и 25 сентября 2019 года компания ФИНГО приняла участие в выставке на XII Международной конференции «ПЫЛЕГАЗООЧИСТКА-2019», организованной ИНТЕХЭКО.
04.07.2019FINGO once again confirmed its compliance with international standards ISO 9001: 2015, ISO 14001: 2015 and ISO 45001: 2018
Fingo again successfully passed a supervisory audit of the integrated management system for compliance with the requirements of international standards.
01.07.2019FINGO received a patent for an improved clamp model for precipitating electrodes of an electrostatic precipitator
FINGO company received a patent for an improved model of a clamp for precipitating electrodes of an electrostatic precipitator, which was developed by specialists of the FINGO Engineering Center as a result of the RnD round.
27.06.2019FINGO at the conference “Implementing the best available technologies: problems and solutions ”
Fingo at the conference “Implementing the best available technologies: problems and solutions ”
13.06.2019Report on the results of the AGM
Report on the results of the AGM
13.06.2019The decision to hold the annual general meeting of shareholders on June 7, 2019
The decision to hold the annual general meeting of shareholders of PJSC NPO FINGO on June 7, 2019.
06.06.2019FINGO took part in the All-Russian conference Reconstruction of Energy-2019
The company Fingo-Complex became a participant of the XI All-Russian Conference "Reconstruction of Energy - 2019", which took place on June 4-5 in Moscow.
24.05.2019FINGO at the international exhibition MinTech in the Republic of Kazakhstan
FINGO presented the latest developments in the field of industrial dust and gas cleaning at the 24th international exhibition of equipment and technologies for the mining, metallurgical, coal and energy industries MinTech-2019, which was held in the Republic of Kazakhstan in Ust-Kamenogorsk from 22 to 24 May.
24.05.2019FINGO Complex at the international environmental conference METALLURGY-INTECHECO-2019
At the international environmental conference METALLURGY-INTECHECO-2019, FINGO Complex presented the latest gas cleaning technologies, electrostatic precipitators, bag filters and other solutions for the modernization and service of dust and gas cleaning systems for the metallurgical industry.
16.05.2019Fingo specialists passed the certification of non-destructive testing (NDT) EN ISO 9712: 2012
The Fingo technical control staff passed certification and received certificates certifying the qualification of non-destructive testing specialists (NDT) EN ISO 9712: 2012.
16.05.2019FINGO at the international summit of the SCO and BRICS countries Metals and alloys
FINGO at the international summit of the SCO and BRICS countries Metals and alloys
16.04.2019FINGO received a patent for an improved electrostatic precipitator model with efficient electrodes
As a result of the RnD round, international specialists from the FINGO engineering center have developed a new high-performance corona electrode for an industrial gas-cleaning electrostatic precipitator.
29.03.2019Fingo's export products received the mark with the mark Made in Russia
Fingo confirmed the status of a bona fide manufacturer and reliable supplier of export products and received the right to label the equipment with the national brand Made in Russia.
14.12.2018Fingo employees received certification as non-destructive testing specialists at the certification center of NIKIMT-Atomstroy JSC
Fingo employees received certification as non-destructive testing (NDT) specialists at the certification center of NIKIMT-Atomstroy JSC
03.12.2018FINGO conducted an international study in the field of technology for corona electrodes
FINGO conducted an international research on the development of technology for corona electrodes over the past 50 years to create a new high-performance electrostatic precipitator.
01.10.2018Interview with Dmitry Zemlyakov for the Russian business industrial portal
Dmitry Zemlyakov Chief Commercial Officer at FINGO in an interview with the industrial portal Business of Russia told about the history of the plant and the new stage of its development, about the competitive advantages and business principles of the company, which help build long-term relationships with customers.
19.06.2018Report on voting results at the annual General meeting of shareholders of PJSC «NPO FINGO»
Report on voting results at the annual General meeting of shareholders of PJSC «NPO FINGO»
18.05.2018Decision to hold the annual General meeting of shareholders on June 9, 2018
Decision to hold the annual General meeting of shareholders on June 9, 2018
16.05.2018Notice of the possibility of exercising the pre-emptive right to purchase the securities placed
Notice of the possibility of exercising the pre-emptive right to purchase the securities placed
22.10.2017On Engineering Day, FINGO celebrates the 70th anniversary of its first production
On Engineering Day, FINGO celebrates the 70th anniversary of its first production
11.02.2017Fingo welders have been certified by the National Welding Control Agency
Welders and welding equipment of FINGO company successfully passed the certification process by the NAKS (National Welding Control Agency) to gain access to work on hazardous and complex objects.